LED Backlit Letters: What the Light Inside Does
LED backlit letters hide the LED inside each letter, so the light passes through the back toward the wall, and a halo forms around each letter. The face itself does not light up, and the glow comes from behind. That makes the LED choice part of the look: the light color, how evenly it spreads, and how you control it. This page covers those choices, then helps you pick the build route. Within the conditions of your site, we choose the most suitable fabrication, finish, light color, and mounting method, and deliver a custom product that truly fits your needs.
LED Modules or LED Strip
The hardest part of any illuminated sign is an even glow with no bright spots, and the LED type is chosen around that. Outdoor letters use waterproof LEDs, and very rainy areas get IP67 LEDs. Indoor letters can use LED strip, which spreads light at a wide angle and glows evenly in a shallow letter. For indoor backlit letters with especially high lighting requirements, we can also use a custom PCB for more even light and a more accurate color temperature.
Light Colors for the Halo
You can pick one light color or a color-changing setup:
- White, 6000K, for a cool white halo.
- Warm white, 3000K, for a softer, yellower halo.
- Natural white, 4000K, between the two.
- Red, yellow, blue, or green as a single color.
- RGB or WRGB color change, run from a controller.
Shades such as purple or amber come from that RGB or WRGB setup, as a close match rather than an exact color. Blue needs a note of its own. The eye is less sensitive to blue, so a blue halo looks dimmer from a distance or in bright surroundings than it does in photos. If you’re choosing blue, ask us for a lit sample rather than judging from pictures.
Working with our partners, we also offer custom light sources to customers who need them, including but not limited to custom PCBs and custom color temperatures.
Dimming, Timers, and Photocells
A dimmer lets you set the brightness from a remote, from 0 to 100 percent. A photocell turns the sign on at dusk and off at dawn, and a timer switches it on and off at the times you set. Each control needs its own wiring planned before production, so tell us what you want when you ask for a quote. Color-changing letters also need a controller, and we can load the lighting program if you send it.
Power and Lifespan
By default, the letters run on 12V DC LED, a common voltage for commercial signs. The power supply sits outside the letters, in a spot with airflow, because it gives off heat as it runs. The LED is rated for over 100,000 hours. It dims slowly over the years, and you only need to replace it when the glow no longer looks bright enough to you.
By default, our LEDs run on steady 12V DC, so photos and clips show steady light. No customer has ever reported flicker to us.
Pick Your Next Step
Start from what you already know, the look you want or the setting, and the route follows.
- You want a metal look
- Luxury or Classic, see the metal family.
- You want light, refined shapes
- Acrylic, lightweight and bright up close, for indoor and outdoor walls.
- You know the setting, not the build
- Start from the matching application page, then quote.
Compare the Three Routes
Luxury and Classic are the metal routes, and Acrylic is the lighter route, for indoor and outdoor walls alike. The comparison table on this page lines them up side by side.
Luxury, premium flush metal
The bright metal route for premium fronts and feature walls, indoors or outdoors. It mounts flush by default and can also mount off the wall. It reads bright, lights a wider area, and gives a stronger halo through its visible light-transmitting acrylic edge.
View Luxury
Classic, from small letters to large letters
The most common backlit sign, with strong weather resistance and wide flexibility in fonts and sizes. It mounts off the wall, and because its halo is reflected light, the effect depends on how reflective the wall is. The overall glow is softer, and it suits indoor and outdoor fronts alike.
Review Classic
Acrylic, light and refined
Backlit acrylic letters use a CNC-engraved shell, so they can take complex custom shapes while staying light. The face of the acrylic shell, and the sides near the face, are covered with paint or powder coat so light doesn’t leak through there. Light escapes through the unpainted acrylic sides nearest the wall and falls straight onto the wall to form a halo. They work indoors and outdoors. Outdoors, they are best mounted under an awning or canopy, where they last longer.
Explore Acrylic
What Comes With Your LED Letters
Each set ships with:
- The sign itself, with every letter and logo part as a separate piece.
- Stud bolts for mounting, by default.
- Spacers when the letters mount off the wall.
- Nuts and washers when the back of the mounting wall can be reached.
- A matched power supply, Mean Well by default.
- About 6.5 ft (2 m) of two-core wire attached to each separate piece.
- A full-size 1:1 layout template.
- A wiring diagram and installation instructions.
What to Send for a Quote
A few details let us recommend a route and quote it:
- Your logo’s design file, ideally the original vector artwork.
- The size you want, or the viewing distance you need.
- Photos of the install spot, the wall material, and any site limits, such as whether you can drill and run wires through the wall.
- Your U.S. destination and the delivery deadline you need.
- Your preferred finish and light color.